ForndLock
2026-11-16 FORNDLOCK Editorial Team

Types of Tubular Locks: 7-Pin vs. 8-Pin, Fixed vs. Removable Core Selection Guide

Buyers usually ask us for "a tubular lock" as if it were one product. Here is the short answer: pin count and core type are two different decisions. Pin count—7-pin, 8-pin, or higher—determines how many unique key codes exist. Core type—fixed or removable—determines how the lock is serviced and re-cored in the field. Most mis-specified tubular lock programs we review at ForndLock get the pin count right for security but the core structure wrong for maintenance, or vice versa. This guide walks through both dimensions, then covers keying systems, fitment specs, and application configurations. 

Tubular Locks

Tubular Locks

How Does a Tubular Lock Cylinder Work?

A tubular lock—also known as a radial or ACE-type cylinder—is a pin tumbler mechanism arranged in a circle rather than a straight line. Its matching key is a hollow cylinder with notches milled around the rim, each corresponding to a radial pin and driver stack inside the plug. Inserting the key pushes each pin stack rearward against its spring until the gap between the key pin and driver pin aligns with the shear line between plug and housing, allowing the plug to rotate and turn the cam. Withdrawing the key lets the springs push the drivers back across the shear line to lock rotation. The circular layout also keeps the cylinder axially compact.

Tubular Cylinder Configurations: Pin Count and Removable-Core Designs

Pin Count: What the Numbers Actually Change

Each additional pin stack adds depth positions to the key code, expanding the available code pool—provided the housing diameter accommodates the extra bore without compromising structural wall thickness.

Dimension

7-Pin Tubular Lock

8-Pin Tubular Lock

Code capacity

Suits fleets with controlled key issue

Larger pool; fewer duplicates across large estates

Pin and driver structure

Seven pin stacks in a circular array (≈51.4° spacing)

Eight pin stacks at 45° spacing; tighter angular spacing

Keyway tolerance

Forgiving of dust and worn keys

Tighter machining; key condition matters more

Anti-drill options

Optional hardened steel ball or insert

Hardened center post and steel inserts common

Housing strength

Adequate wall thickness for thin panels

Same diameter; thinner wall between adjacent bores

Picking resistance

Resists common flat-blade tools

More resistant to impressioning due to tighter angular spacing

Eight pins buy a larger key pool, not an inherently stronger lock. True resistance to physical attack depends on hardened anti-drill inserts ahead of the pin stacks, tight machining tolerances, and housing material strength—an 8-pin cylinder provides no advantage if the housing material cannot withstand a pry attack. Higher-pin specialty designs (10-pin or staggered stacks) require larger barrel diameters to maintain structural integrity.

Removable-Core Tubular Locks: Field Core Replacement Without Panel Disassembly

Removable core addresses field serviceability; it does not increase the security rating. This structure is available in both 7-pin and 8-pin cylinders. Using a dedicated control key, operators can extract the entire pin assembly while leaving the outer housing, cam, and mounting nut installed. For distributed vending or locker fleets, operators can carry spare cores for an on-site swap, eliminating the need to replace entire lock assemblies. The trade-offs are straightforward: the housing needs added depth, the core-to-body joint must withstand vibration, and control key custody is critical.

Tubular Lock Hardware We Supply at ForndLock

Product

Image

Key Specifications

Typical Use

D3-1602 Tubular Quarter-Turn Lock

 

D3 1602 Tubular Quarter Turn Lock


4-pin tubular key; Passivated stainless steel; M12×10 mounting (see product drawing); Clockwise locking (Type L); UL FTTA2 / FTTA8 Class 1

Outdoor enclosures, washdown cabinets, industrial equipment panels

D3-1608 Tubular Push-Lock

 

D3 1608 Tubular Push Lock


Chrome-plated brass; Press-to-lock pop-up deadbolt; M12×10 mounting (see product drawing); IP54; UL FTTA2 / FTTA8 Class 1

Advertising light boxes, display cabinets, compact access panels

K1120-036 Tubular Compression Latch

 

K1120 036 Tubular Compression Latch


Tubular key; 180° rotation; 5 mm compression stroke; Over-center anti-vibration locking; up to IP66

HVAC cabinets, network enclosures, laboratory machinery, transit equipment

Keying Configurations: Keyed Alike, Keyed Different, or Master Keyed?

For volume buyers, the keying scheme is an operational decision that governs technician key rings and replacement costs. Specify it before cylinders are pinned, not after delivery.

Keying Mode

How It Works

Operational Benefit

Risk Profile

Best Fit

Keyed Alike (KA)

Every cylinder in the batch shares one code

One key per technician across a route or site

One lost key compromises the entire batch

Same-owner fleets, cabinets under one supervisor

Keyed Different (KD)

Each cylinder has a unique code

A lost key exposes only a single enclosure

Higher key count; requires a key register

Multi-tenant kiosks, cash compartments

Master Keyed

Individual key per lock plus a master for a group

Hierarchical access for crews and supervisors

Master key loss is a full-system event; master pinning reduces the usable code pool and adds a second shear line

Large facilities with tiered access rights

At ForndLock, we recommend using KA inside a single trust boundary, KD wherever cash or multi-tenant assets are stored, and master keying only when an organization genuinely operates two distinct access tiers. Ensure all assigned key codes are recorded on the purchase order for future reference.

Tubular Lock

Tubular vs. Standard Cam Locks: Which Fits Your Enclosure?

Both mechanisms actuate a quarter-turn cam behind a panel, trading key control and tamper resistance against unit cost and simplicity.

Comparison Point

Tubular Cylinder

Standard Cam Lock

Key profile

Round shell with rim notches; harder to copy casually

Flat blade key; easy to duplicate

Code capacity

More stacks in a compact diameter; larger code family

Fewer codes at equivalent body size

Cylinder depth

Short for its diameter; suits thin doors

Longer body; requires more rear clearance

Anti-pick / anti-drill

Resists common flat-blade tools; dedicated tubular picks exist, so hardened inserts are recommended

Lower baseline; depends on sidebar or wafer count

Cost per unit

Moderately higher

Lowest, especially at high volume

Field replacement

Removable-core variants swap in seconds

Usually replaced as a complete assembly

Choose a tubular cylinder where key control spans many distributed units, panel depth is tight, or the lock sits on public-facing equipment. Choose a standard cam lock for internal cabinets inside controlled rooms where casual retention is sufficient, or step up to a compression latch when perimeter gasket squeeze is required. On a panel inside a locked electrical room, a tubular lock is over-specified—review our industrial cabinet latches guide to match handle styles and security grades to lower-risk enclosures.  

Critical Fitment Specs: Cutout, Barrel Length, Cam Geometry, and Rear Clearance

Measure the finished door assembly rather than the old lock hardware. These parameters govern clean installation:

1. Cutout and anti-rotation feature. Standard tubular cylinders typically mount through a 19 to 25 mm round hole with single-D or double-D flats (or a locating spigot); compact quarter-turn series use their own mounting dimensions, such as M12×10. A plain round hole allows the housing to spin under key torque.

2. Barrel length and panel thickness. Operating lengths generally span 12.5 mm to 38 mm. The barrel must clear the outer skin, insulation core, compressed gasket, and inner liner while leaving enough thread for the retaining nut.

3. Cam length and offset. The cam must swing past the door edge and land squarely behind the frame lip. Offset determines whether the cam clears frame returns during rotation.

4. Rotation angle and rear clearance. Confirm whether 90° or 180° rotation matches your frame stop, and verify that the rear nut and cam swing arc clear internal DIN rails, wiring harnesses, or battery trays.

Material and Finish

Where It Fits

Passivated stainless steel body and key

Outdoor, washdown, food, and medical equipment

Zinc alloy, chrome or nickel plated

Indoor kiosks, cabinets, cost-sensitive volume builds

Zinc-nickel plated body

Humid or coastal sites requiring extended salt-spray life

Hardened steel or brass pins, stainless cam

Wet environments and high-cycle enclosures

If you are standardizing cutout tolerances across multiple panel types, refer to our industrial latch mechanisms and fitting specs guide for cross-family mounting clearances.

Industrial Applications: Vending, Kiosks, Control Cabinets, and Transit

● Vending machines and self-service terminals: 7- or 8-pin cylinder with removable core, keyed alike per route, stainless or zinc-nickel body, barrel sized for 1.5 to 3 mm sheet metal, and adjustable cam pitch.

● Electrical control cabinets: 7-pin tubular or standard cam lock, keyed different per zone with a supervisor master, chrome-plated zinc alloy indoors or stainless outdoors, with cam length verified against internal DIN rails.

● Rail and transit cabinets: 8-pin removable core, master keyed across a maintenance depot, stainless steel with anti-drill inserts, and rear clearance checked against cable trays. For vibration-heavy rail doors, compare with our railway lock selection guide.

● Fuel dispensers and outdoor kiosks: Stainless steel housing with brass or stainless pins, keyed different per site so a lost key never travels, sealed cam face, and extended barrel for double-skin insulated panels.

About ForndLock

ForndLock supplies custom-pinned tubular cylinders—from compact quarter-turn designs to 8-pin removable-core assemblies—tailored to your panel thickness, cutout, and keying scheme. Our engineering team verifies tolerances, cam clearances, and anti-drill specifications prior to sampling. Share your cutout drawing and keying plan with us for a pre-order fitment check.

Email: info@forndlock.com

Obtain Project Quotation and Technical Support

Submit your product requirements, application scenarios, or customization requests. ForndLock can provide selection advice, sample support, and bulk quotation solutions for industrial locks, hinges, handles, and cabinet hardware projects.